Connex ProSight Installation And Operation Manual - page 69
69
Specifications|CONNEX ProSight
Doc P/N: 9040962 | Rev 04 | Printed 03 January 2017
Navigation pane
Specifications
CONNEX ProSight
•
Supported LOS range of 1000ft without any range limitation
•
Advanced High-Definition spectator viewing mode
•
Receiver Unit outputs standard 720p60 over HDMI for reducing
motion blur
•
Compatible with all popular HDMI based Goggles/monitor
•
Digitally paired transmitter to receiver for crosstalk free flight
HD Transmitter
•
Up to 26mS video latency from Camera lens to HD Receiver
HDMI output
•
Power consumption – ~4.1Watt
•
Power input – 7v-17v; support 2S to 4S batteries
•
Antennas – two external MMCX connectors
•
Dimensions – 70mm x 36.5mm x 7.2mm
•
Weight – 32 gr
•
UX: LEDs – status indication only
•
Interfaces –
»
Power in (4 pins)
»
Power out to the camera & recorder
»
Micro USB – Connection to application; Wired pairing
»
UART for Telemetry
»
Proprietary MIPI (14 pin Right-Angle, JST SM20B-SRSS) –
HD Video input
•
Environmental:
»
Operating – -10° to 40° C
»
Operating humidity – 10% - 90%
»
Storage – -10° to 75° C
Camera
•
Advanced High-Dynamic-Range Support (115dB)
•
HD 720P30 / 720i60 resolution
•
FPV Optimized for Outdoor and Indoor flights
•
Dimensions – 28mm x 20mm x 27mm
•
105 degrees FOV with pre-focused lens (the lens can be
replaced, although this is not recommended)
•
Compatible with ProSight HD transmitter Only
•
Power up from ProSight HD transmitter
•
Weight – 13gr (6g camera + 7g lens)
CONNEX ProSight Installation and Operation Guide