Connex ProSight Installation And Operation Manual - page 24
24
Installing the Units|Installing the HD Receiver
Doc P/N: 9040962 | Rev 04 | Printed 03 January 2017
Navigation pane
Installing the HD Receiver
This section reviews the tasks associated with installing the HD receiver.
A-
Connecting Antennas
To connect the
to the HD receiver:
1. Connect the five antennas (1) to the five antenna connectors (2).
2. To avoid interference, place the HD receiver Antennas as far as
possible from other transceiver devices, especially transmitters in
the 5 GHz band.
2
1
Notes:
• For configuration purposes: the distance between the receiver and its paired transmitter should be 1–10 meters.
• When using multiple ProSight units in the same area:
– The distance between two adjacent receivers should be at least one meter.
– To avoid interference, verify that the distance between your receiver and other transmitters is at least four meters.
CONNEX ProSight Installation and Operation Guide