Connex ProSight Installation And Operation Manual - page 64
64
Configuration Using ProSight Mobile Application |Home Screen Overview
Doc P/N: 9040962 | Rev 04 | Printed 03 January 2017
Navigation pane
Home Screen Overview
The following information is displayed on the home screen:
•
Connection status (1)
•
Paired HD receiver name (2) – tap the information icon
i
next to
the receiver name to display the device parameters (see
).
•
Paired Devices (3) – list of receivers that have been paired for
bluetooth communication in the past
•
Around Me (4) – list of other CONNEX ProSight receivers in the
area. Selecting a device that is not already paired requires entering a
pairing code (see
Viewing Bluetooth Pairing Code
).
Pairing with a Receiver via Bluetooth
This section shows how to initiate first communication between a mobile
device and the HD receiver.
1. Verify that bluetooth on your mobile device is On.
2. Select a device from the
Around Me list (see
).
The system displays a message, asking to enter a pin code.
3. Enter the bluetooth pairing code that appears in the Bluetooth OSD
menu and click
OK
(see
Viewing Bluetooth Pairing Code
).
1
2
3
4
CONNEX ProSight Installation and Operation Guide