D-Link DES-3028 User Manual - Stp Instance Settings
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Type
This field allows the user to choose a desired method for altering the MSTI settings. The
user has four choices.
•
•
Add - Select this parameter to add VIDs to the MSTI ID, in conjunction with the
VID List parameter.
Remove - Select this parameter to remove VIDs from the MSTI ID, in con-
junction with the VID List parameter.
VID List (1-4094)
This field is used to specify the VID range from configured VLANs set on the Switch that the
user wishes to add to this MSTI ID. Supported VIDs on the Switch range from ID number 1
to 4094. This parameter can only be utilized if the Type chosen is Add or Remove.
Click Apply to implement changes made.
STP Instance Settings
The following window displays MSTIs currently set on the Switch. To view the following table, click L2 Features > Spanning
Tree > STP Instance Settings:
Figure 7- 22. STP Instance Settings window
The following information is displayed:
Parameter Description
Instance Type
Displays the instance type(s) currently configured on the Switch. Each instance type is classified
by a MSTI ID. CIST refers to the default MSTI configuration set on the Switch.
Instance Status
Displays the current status of the corresponding MSTI ID
Instance Priority
Displays the priority of the corresponding MSTI ID. The lowest priority will be the root bridge.
Click Apply to implement changes made.
Click the Modify button to change the priority of the MSTI. This will open the Instance ID Settings window to configure.
Figure 7- 23. Instance ID Settings - modify priority window
The following parameters can be viewed or set:
Parameter Description
MSTI ID
Displays the MSTI ID of the instance being modified. An entry of 0 in this field denotes the
CIST (default MSTI)
97