D-Link DES-3028 User Manual - Local Users

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch 

Local Users 

In the Security folder, open the 802.1x folder and click 802.1X User to open the 802.1x User window. This window will allow 

the user to set different local users on the Switch. 

Figure 10- 21. Local Users Configuration window 

Enter a User Name, Password and confirmation of that password. Properly configured local users will be displayed in the Local 

Users Table at the bottom of the same window. 

Initializing Ports for Port Based 802.1x 

Existing 802.1x port and MAC settings are displayed and can be configured using the window below. 

Click Security > 802.1x > Initialize Port(s) to open the following window: 

Figure 10- 22. Initialize Port window 

This window allows initialization of a port or group of ports. The Initialize Port Table in the bottom half of the window displays 

the current status of the port(s).  

This window displays the following information: 

Parameter                 Description 

From and To 

Select ports to be initialized. 

Auth PAE State 

The Authenticator PAE State will display one of the following: Initialize, Disconnected, 

Connecting Authenticating Authenticated Aborting Held ForceAuth ForceUnauth and N/A

156