D-Link DES-3028 User Manual - User Accounts

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch 

Figure 6- 8. DHCP/BOOTP Relay Interface Settings and DHCP/BOOTP Relay Interface Table window 

The following parameters may be configured or viewed. 

Parameter                       Description 

Interface 

The IP interface on the Switch that will be connected directly to the Server. 

Server IP 

Enter the IP address of the DHCP/BOOTP server. Up to four server IPs can be configured 

per IP Interface 

User Accounts 

Use the User Account Management window to control user privileges. To view existing User Accounts, open the 

Administration folder and click on the User Accounts link. This will open the User Account Management window, as shown 

below. 

Figure 6- 9. User Accounts window 

To add a new user, click on the Add button.  

Figure 6- 10. User Account Modify Table window 

Add a new user by typing in a User Name, and New Password and retype the same password in the Confirm New Password. 

Choose the level of privilege (Admin or User) from the Access Right drop-down menu. 

To modify or delete an existing user, click on the Modify button for that user. 

33