D-Link DES-3028 User Manual - System Log Settings

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch 

System Log Settings 

The Switch can send Syslog messages to up to four designated servers using the System Log Server. In the Administration 

folder, click System Log Settings, to view the window shown below. 

Figure 6- 13. System Log Host window 

The parameters configured for adding and editing System Log Server settings are the same. See the table below for a description. 

Figure 6- 14. System Log Host – Add window 

The following parameters can be set: 

Parameter                     Description 

Index 

Syslog server settings index (1-4). 

Host IP 

The IP address of the Syslog server. 

Severity 

This drop-down menu allows you to select the level of messages that will be sent. The options 

are Warning, Informational, and All. 

Facility 

Some of the operating system daemons and processes have been assigned Facility values.  

Processes and daemons that have not been explicitly assigned a Facility may use any of the 

"local use" facilities or they may use the "user-level" Facility. Those Facilities that have been 

designated are shown in the following: Bold font indicates the facility values that the Switch is 

currently employing. 

Numerical       Facility 

Code 

36