D-Link DES-3028 User Manual - Snmp Engine Id

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch 

The following parameters can set: 

Parameter                         Description 

Host IP Address 

Type the IP address of the remote management station that will serve as the SNMP host 

for the Switch. 

SNMP Version 

V1 - To specifies that SNMP version 1 will be used.   

V2 - To specify that SNMP version 2 will be used.  

V3-NoAuth-NoPriv  - To specify that the SNMP version 3 will be used, with a NoAuth-

NoPriv security level. 

V3-Auth-NoPriv  - To specify that the SNMP version 3 will be used, with an Auth-NoPriv 

security level. 

V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security 

level. 

Community String/ 

SNMP V3 User Name 

Type in the community string or SNMP V3 user name as appropriate.

To implement your new settings, click Apply. To return to the SNMP Host Table, click the 

Show All SNMP Host Table Entries

link. 

SNMP Engine ID 

The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify the 

SNMP engine on the Switch. To display the Switch's SNMP Engine ID, open the SNMP Manger folder, (located in the 

Administration)folder and click on the SNMP Engine ID link. This will open the SNMP Engine ID window, as shown below. 

                                                                Figure 6- 39. SNMP Engine ID Configuration window 

To change the Engine ID, type the new Engine ID in the space provided and click the Apply button. 

56