D-Link DES-3028 User Manual - Packet Errors

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch 

Figure 11- 8. Tx Packets Analysis window (table for Bytes and Packets) 

The following fields may be set or viewed: 

Parameter                       Description 

Time Interval  

Select the desired setting between 1s and 60s, where "s" stands for seconds. The default 

value is one second. 

Record Number  

Select number of times the Switch will be polled between 20 and 200. The default value is 

200. 

Bytes 

Counts the number of bytes successfully sent from the port. 

Packets 

Counts the number of packets successfully sent on the port. 

Unicast 

Counts the total number of good packets that were transmitted by a unicast address. 

Multicast 

Counts the total number of good packets that were transmitted by a multicast address. 

Broadcast 

Counts the total number of good packets that were transmitted by a broadcast address. 

Show/Hide 

Check whether or not to display Bytes and Packets. 

Clear 

Clicking this button clears all statistics counters on this window. 

View Table 

Clicking this button instructs the Switch to display a table rather than a line graph. 

View Line Chart 

Clicking this button instructs the Switch to display a line graph rather than a table. 

Packet Errors 

The Web Manager allows port error statistics compiled by the Switch's management agent to be viewed as either a line graph or a 

table. Four windows are offered. 

181