D-Link DES-3028 User Manual - Configure 802.1X Guest Vlan

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch 

Configure 802.1x Guest VLAN  

In the Security menu, open the 802.1x folder and click Configure 802.1x  Guest VLAN, which will display the following 

window for the user to configure. Remember, to set a Guest 802.1x VLAN, the user must first configure a normal VLAN which 

can be enabled here for Guest VLAN status.  

Figure 10- 18. Configure 802.1x Guest VLAN window 

The following fields may be modified to enable the guest 802.1x VLAN: 

Parameter                 Description 

VLAN Name 

Enter the pre-configured VLAN name to create as a Guest 802.1x VLAN. 

Operation 

The user has two choices in configuring the Guest 802.1X VLAN, which are: 

Enabled – Selecting this option will enable ports listed in the Port List below, as part of the Guest 

VLAN. Be sure that these ports are configured for this VLAN or users will be prompted with an 

error message. 

Disabled  - Selecting this option will disable ports listed in the Port List below, as part of the 

Guest VLAN. Be sure that these ports are configured for this VLAN or users will be prompted 

with an error message. 

Port List 

Set the port list of ports to be enabled for the Guest 802.1x VLAN using the pull-down menus. 

Click  Apply to implement the guest 802.1x VLAN settings entered. Only one VLAN may be assigned as the 802.1X Guest 

VLAN. 

152