D-Link DES-3028 User Manual - Poe Port Configuration

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch 

PoE Port Configuration  

Figure 6- 41. PoE Port Configuration window 

The previous window contains the following fields to configure for PoE: 

Parameter                     Description 

PoE System 

Power Limit 

Sets the limit of power to be used from the Switch’s power source to PoE ports. The user may 

configure a Power Limit between 37 and 185W (for the DES-3028P) and 37 and 370W (for the 

DES-3052P). The default setting is 185W (DES-3028P) and 370W (DES-3052P). 

Power Disconnect 

Method 

The PoE controller uses either Deny next port or Deny low priority port to offset the power 

limit being exceeded and keep the Switch’s power at a usable level. Use the drop down menu 

to select a Power Disconnect Method. The default for the Power Disconnect Method is Deny 

next port. Both Power Disconnection Methods are described below: 

Deny next port - After the power limit has been exceeded, the next port attempting to power 

up is denied, regardless of its priority. 

Deny low priority port - After the power limit has been exceeded, the next port attempting to 

power up causes the port with the lowest priority to shut down to allow the high-priority and 

58