D-Link DES-3028 User Manual - Snmp Group Table

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch 

manager can access. 

To implement your new settings, click Apply. To return to the SNMP View Table, click the 

Show All SNMP View Table Entries

link. 

SNMP Group Table 

An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the 

previous menu. To view the SNMP Group Table window, open the SNMP Manager folder in the Administration folder and 

click the SNMP Group Table entry. The following window should appear: 

Figure 6- 33. SNMP Group Table window 

To delete an existing SNMP Group Table entry, click the corresponding   under the Delete heading. 

To display the current settings for an existing SNMP Group Table entry, click the View button located under the Display 

heading, which will show the following window. 

Figure 6- 34. SNMP Group Table Display window 

To add a new entry to the Switch's SNMP Group Table, click the Add button in the upper left-hand corner of the SNMP Group 

Table window.  This will open the SNMP Group Table Configuration window, as shown below. 

53