D-Link DGS-3204 - Switch - EN 100VG-AnyLAN User Manual - page 116
Manual is about: User Guide
of
140
Gigabit Ethernet Switch User’s Guide
102
Web-Based Network Management
♦
RX frames/sec Counts all valid frames received on
the port per second since the Switch was last
rebooted.
♦
% of Utilization This shows the percentage of
available bandwidth each port is using over the
amount of time specified by the update interval.
Traffic
The port statistics shown by default are those for the
port you last configured. Once in the Port Statistics
screens, you can click any port on the switch graphic
to show statistics for that port.
The information is described as follows:
♦
Link Status Indicates whether the port is online
and working (1000/Full/Flow control off or
1000/Full/Flow control on) or not (Link Down).