D-Link DGS-3204 - Switch - EN 100VG-AnyLAN User Manual - Rear Panel
Gigabit Ethernet Switch User’s Guide
12
Identifying External Components
♦
Four Gigabit Ethernet ports of fixed 1000BASE-SX
multi-mode fiber interface.
♦
RS-232 DCE console port for diagnosing the Switch
via a connection to a PC and Local Console
Management.
♦
Comprehensive LED indicators that display the
conditions of the Switch and status of the network. A
description of these LED indicators follows (see LED
Indicators).
Rear Panel
The rear panel of the Switch consists of an AC power
connector. The following shows the rear panel of the
Switch.
Figure 3-2. Rear panel view of the DGS-
♦
AC Power Connector This is a three-pronged
connector that supports the power cord. Plug in the
female connector of the provided power cord into this
connector, and the male into a power outlet.
Supported input voltages range from 100 ~ 240 VAC at
50 ~ 60 Hz.