D-Link DGS-3204 - Switch - EN 100VG-AnyLAN User Manual - page 86
Gigabit Ethernet Switch User’s Guide
72
Using the Console Interface
♦
Jabbers The number of frames with length more
than 1518 bytes and with CRC error or misalignment
(bad framing).
♦
Late Collisions The number of collisions that occur
at or after the 64
th
byte (octet) in the frame.
♦
Mac Rx Errors The number of frames with received
MAC Errors.
♦
Dropped Frames Counts received packets which
are dropped due to any of the following reasons: lack
of available receive buffers, port-disable, link-test-fail,
spanning tree, or empty distribution list.
♦
Total errors The sum of the CRC Errors, Oversize
Frames, Fragments, Jabbers, Late Collisions, Mac Rx
Errors, and Dropped Frames counters.
♦
Collisions The number of collision errors.
To display the Port Packet Analysis Statistics table:
1.
Choose Network Monitoring from the main menu.
2.
Choose Traffic Statistics from the Network
Monitoring menu.
3.
Choose Port Packet Analysis
Statistics from the
Traffic Statistics menu.