D-Link DGS-3204 - Switch - EN 100VG-AnyLAN User Manual - page 67
Manual is about: User Guide
of
140
Gigabit Ethernet Switch User’s Guide
Using the Console Interface
53
Figure 6-15. STP Parameters Setting screen
3.
Change the Disabled setting to Enabled in the
Spanning Tree Protocol field.
4.
Enter the Bridge Max Age in the Max Age(6-40 sec)
field.
5.
Enter the Bridge Hello Time in the Hello Time(1-10 sec)
field.
6.
Enter the Bridge Forward Delay time in the Forward
Delay(4-30 sec) field.
7.
Enter the Bridge Priority in the Bridge Priority(0-
65535) field.
The information on the screen is described as follows:
♦
Spanning Tree Protocol Select Enabled to
implement the Spanning Tree Protocol.