D-Link DGS-3204 - Switch - EN 100VG-AnyLAN User Manual - Power Failure
Manual is about: User Guide
of
140
Gigabit Ethernet Switch User’s Guide
10
Unpacking and Setup
turned on without having any or all LAN segment cables
connected.
After the device is powered on, the LED indicators should
respond as follows:
♦
The Power LED indicator will light while the Switch
loads onboard software and blinks when performing a
self-test.
♦
The Console LED indicator will remain ON if there is a
connection at the RS-232 port, otherwise this LED
indicator is OFF.
Power Failure
As a precaution, the Switch should be unplugged in case of
power failure. When power is resumed, plug the Switch
back in.