EcoQuest Fresh Air Owner's Manual - page 11
11
10
9
8
7
11
7. To remove the catalytic
screen, grasp the frame and
gently pull screen out of unit.
9. Loosen two (2) screws holding
the plate cage. Slide the cage
forward, lift and remove.
10. Rotate starter and lift
to remove.
11. Rotate UV Bulb 1/4 turn,
lift out of holders, and
remove from unit.
8. Disconnect the two (2)
lead wires attached to
the purifier plate cage.
REMOVING THE PURIFIER PLATE & CATALYTIC SCREEN
REMOVING THE UV BULB AND STARTER
TIP: Hot water and ammonia work well to clean your
Ecotech Purification Plates, but did you know that ecoH
Household Cleaner will clean your purification plates
without the fumes or smell of ammonia. Ask your
EcoQuest Dealer for more information.
6
6. To remove the purification
plate, grasp edge of plate in
the center and gently pull out.
NOTE: If the plate is difficult to
remove, gently press down on
the lower metal contact tab.