EcoQuest Fresh Air Owner's Manual - page 7
7
PERFORM MAINTENANCE
(approx. every 30 days)
• Vacuum Lint Screen
• Clean Purifier Plate
• Clean the Catalytic Screen
• Vacuum Front and Rear Grill openings
INSTALL PLATE
The purifier plate is missing
or installed incorrectly
• Install or Re-install purifier plate correctly
REPLACE PLATE
The purifier plate is not
functioning properly.
• Replace the old purifier plate with a new purifier plate (available
from your EcoQuest Dealer)
REPLACE LAMP
The germicidal UV lamp is
no longer working correctly
• Replace the UV lamp and starter (new lamps and starters are
available from your EcoQuest Dealer)
LCD SCREEN
The LCD Screen is used to display all current settings as well as
any maintenance reminders and service messages.
LCD DISPLAY
MAINTENANCE AND SERVICE REMINDERS
LCD SCREEN BACKLIGHT
As adjustments are being made, the LCD screen backlight will
brighten and the settings on the screen will change. After 15
seconds without change, the backlight will return to normal.
If a maintenance reminder or a service reminder appears, the
backlight will brighten and stay bright until the Reminder Reset
button is pressed or the service problem is corrected.
Purifier Setting
Fan Speed
Purifier Coverage
Reminders (normally blank - reminders appear here when unit needs maintenance)
RESETTING THE REMINDERS
The only reminder you need to reset is the PERFORM MAINTENANCE
reminder (after performing maintenance, press the Reminder Reset
button and the screen will display CLEARED, then clear the message).
All the other service reminders will clear automatically once the unit
has been turned off and back on and the problem has been corrected.
SEE PAGES 10 - 13 FOR REMOVAL AND INSTALLATION INSTRUCTIONS
Be sure to press the Reminder
Reset button to clear the reminder
following regular maintenance