F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 - Administrator's Manual - page 175
CHAPTER 5
175
Step 2. Configure Incoming E-mail Scanning
1. Select Enable Incoming E-mail Scanning.
2. Select the action to take from the Action on incoming infected
attachment drop-down list. For explanations on the different actions,
see “
E-mail Scanning Configuration Settings
”, 172.
3. Select the action take from the Action on scanning failure drop-down
list.
4. Select the action to take from the Action on malformed message parts
drop-down list.
Step 3. Configure Outgoing E-mail Scanning
1. Select Enable Outgoing E-mail Scanning.
2. Select the action to take from the Action on incoming infected
attachment drop-down list.
3. Select the action take from the Action on scanning failure drop-down
list.
4. Select the action to take from the Action on malformed message parts
drop-down list.
Step 4. Check the General Settings
Check that the other settings on this page are suitable for your system,
and modify them if necessary. For more information on the other E-mail
Scanning settings, see “
Configuring E-mail Scanning
”, 172.
Step 5.
1. Click
to save the policy data.
2. Click
to distribute the policy.