F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 - Administrator's Manual - page 188
188
8. Check that all the settings on this page are defined as they should be.
Then click
Disallow user changes
.
9. Select the E-mail Scanning page.
10. Check that all the settings on this page are defined as they should be.
Then click
Disallow user changes
.
11. Click
to save the policy data.
12. Click
to distribute the policy.
5.10 Configuring F-Secure Client Security Alert
Sending
This section describes how to configure the product to send virus alets an
e-mail address and how to disable the alert pop-ups.
5.10.1 Setting F-Secure Client Security to Send Virus Alerts to
an E-mail Address
In this example all the security alerts that the managed F-Secure Client
Security clients generate are forwarded to e-mail.
Step 1.
1. .Select the Root in the Policy Domains tab.
2. Go to the Settings tab and select the Alert Sending page.
Step 2. Set up E-mail Alert Sending
If E-mail Alert Sending has not been set up before, you can do it now, as
follows:
1. Enter the address of the SMTP server in the E-mail Server address
(SMTP) field.
Use the following format: