F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 - Administrator's Manual - page 230
230
If a domain is selected, the Progress field displays one of the following:
3. When all required version numbers are selected, click
Start
. The
Installation Editor launches the Installation Wizard, which queries the
user for the installation parameters. The Installation Editor then
prepares a distribution installation package that is customized for the
specific installation operation. The new package is saved on
F-Secure Policy Manager Server.
4. Because the installation operation uses policy-based triggering, you
must distribute new policy files. The policy file will contain an entry
that tells the host to fetch the installation package and perform the
installation.
Note that it may take a considerable length of time to carry out an
installation operation. This may happen if an affected host is not
currently connected to the network, or if the active installation
operation requires a user to restart his host before the installation is
completed. If the hosts are connected to the network and they send
and receive policy files correctly, then there could be a real problem.
The host may not be correctly acknowledging the installation
operation. In any case, it is possible to remove the installation
left and number of failed installations. Click the
button in the progress field for detailed status
information.
Completed
The installation or uninstallation operation
succeeded on all hosts.
(Empty field)
No operations are active. The Installed Version
field displays all currently installed product
versions.
The
Start
button is used to start the installation operations selected
in the Version to Install field. If the installation editor is closed
without first clicking the
Start
button, then all changes will be
discarded.