- DL manuals
- Ganz
- Security Camera
- ZC-PT Series
- Installation Manual
Ganz ZC-PT Series Installation Manual
Summary of ZC-PT Series
Page 2: Preface
Installation guide 1 preface information given in this manual was current when published. The company reserves the right to revise and improve its products. All specifications are subject to change without notice. Notice this manual provides installation information for the outdoor integrated high s...
Page 3
Installation guide 2 this symbol on the product or on its packaging indicates that this product shall not be treated as household waste in accordance with directive 2002/96/ec. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment...
Page 4: Warnings and Cautions
Installation guide 3 warnings and cautions • handle the camera carefully do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. • installing electricity wiring carefully ask qualified personnel of electrical wiring for the installation. Ple...
Page 5: Table of Contents
Installation guide 4 table of contents 1. Introduction................................................................................................................6 2. Standard package content .......................................................................................7 3. Camera setup...
Page 6
Installation guide 5 5.2 data formats transforming.............................................................................45 5.3 signal distribution ...........................................................................................46 5.4 coaxial telemetry..................................
Page 7: 1. Introduction
Installation guide 6 1. Introduction with weather resistant feature, the mini ptz camera is applicable to outdoor installation. The ptz camera supports one cabling for easy installation, and can be integrated with various digital surveillance products, such as dvrs, control keyboards, and accessorie...
Page 8: Standard Package Content
Installation guide 7 2. Standard package content before proceeding, please check the box contains the items listed here. If any item is missing or has defects, do not install or operate the product and contact your dealer for assistance. Analog dome camera package dome camera with outdoor mount kit ...
Page 9
Installation guide 8 ip dome camera package dome camera with outdoor mount kit data cable for power supply, video, audio and alarm (ac 24v) lubricant waterproof rubber m3 standard screw (x1) m3 security screw (x1) m5 standard screw (x1) m5 security screw (x1) security torx optical cover quick guide ...
Page 10: 3.1 Preparations
Installation guide 9 3. Camera setups and cable connection before installing or connecting the dome camera, please refer to this section and complete preparations for dome camera setups and various switch settings. 3.1 preparations for dome camera setups the following installation procedure is for t...
Page 11
Installation guide 10 step 4 smear some lubricant on the surface of the dome cover’s waterproof rubber ring. Then attach the dome cover to the camera body by first aligning the center point on the dome cover with one of the four holes on the dome camera housing as shown in the figure. Step 5 gently ...
Page 12
Installation guide 11 step 6 screw the dome cover and camera body together with the supplied m3 standard/security screw. For fastening the security screw, please use the supplied security torx. Step 7 then tighten the two slotted screws on the camera housing as shown in the figure by turning them co...
Page 13: 3.2 Dome
Installation guide 12 3.2 dome camera setups before connecting the dome camera to other devices of cctv system, please complete the dome camera’s id and communication switch settings. These switches are located on the bottom of the dome camera. 3.2.1 switch definition please refer to the following f...
Page 14: 3.2.2
Installation guide 13 3.2.2 communication switch setting the table below shows the function of each switch within the communication switch for the analog and ip dome cameras. Analog dome camera communication switch sw 1 sw 2 rs-485 setting sw 3 termination sw 4 line lock sw 5 system initialization s...
Page 15: 3.2.3
Installation guide 14 ip dome camera the ip dome camera’s communication switches are specified in the table below. Each switch’s default setting is shown as the figure below. Do not change the default setting, or some functions may not work properly. Communication switch sw 1 sw 2 audio setting sw 3...
Page 16: 3.2.4
Installation guide 15 3.2.4 camera control protocol setup (analog model) define the protocol you are going to use basing on the devices of your surveillance system. Generally, use one protocol even the devices are provided from different manufacturers. Use the switch to set your camera control proto...
Page 17: 3.3
Installation guide 16 3.3 cable definition and requirements for operation, the integrated dome camera requires the video cable to carry the video signals to the remote viewing site, power cable to power the dome camera and rs-485 data cable to carry commands from the control device. 3.3.1 cable requ...
Page 18: 3.3.3
Installation guide 17 note: be careful not to pull the cables improperly during installation. Additionally, it is suggested to fasten the cables after cable connection is completed. Furthermore, when wiring the ac 24v power cable, make sure the ground wire is inserted into the mid-pin of the termina...
Page 19
Installation guide 18 analog dome camera the analog dome camera’s 22-pin connector definition is listed as below. Pin definition cable pin definition cable 1 ac 24-1/dc (＋) 20awg/18awg 12 alm-1 2 alm nc 13 alm-3 3 ac 24-2/dc (－) 20awg/18awg 14 alm-2 4 alm no 15 alm-4 5 fg 20awg/18awg 16 alm-5 6 alm ...
Page 20: 3.3.4
Installation guide 19 3.3.4 rs-485 connector definition (analog model) rs-485 is the interface that communicates the dome camera and its control device. Please connect the control keyboard to the dome camera through the terminal block. The recommended cables for rs-485 communication are cat 5 cables...
Page 21: 3.3.6
Installation guide 20 insert the terminal into the pin holes on the connector housing, with the hook outward, as indicated in the figure. To unlock the terminal, press the hook, as indicated in the figure, with a proper tool and pull it out gently. Connect the 22-pin connector to the dome camera. No...
Page 22: 4. Dome
Installation guide 21 4. Dome installation basing on user’s installation environments, the dome camera can be installed on ceiling, on wall or on pole. In the following section, various dome camera’s installation accessories, installation methods and installation procedures will be described in deta...
Page 23
Installation guide 22 transparent/vandal proof/smoke cover diameter: 147 mm (5.8 inches) power adapter 77h07-a1030 (input: 100~115vac/output: 24vac 72va) 77h07-a2030 (input: 220~230vac/output: 24vac 72va) note: when wiring, make sure the g/y wire (ground) inserted into the mid-pin of the terminal bl...
Page 24
Installation guide 23 compact pendent mount 184×104×115.2 mm (7.24×4.09×4.54 inches); 0.6 kg (1.2 lbs) supplied with rubber washer-8×1, pendent tube washer×1, spring washer-8×1 and m8*12 screw×1. Straight tube iron, height: 250/500 mm (9.8/19.7 inches) ,diameter: 50 mm (2 inches) 1 kg (2.2 lbs) / 1....
Page 25
Installation guide 24 corner standard mounting plate 222(l)×204(w)×117(d) mm (8.7×8×4.6 inches); 2 kg (4.4 lbs); supplied with washer-8×4, spring washer×4, m8*16 screw×4, m8 nut×4. Pole thin direct mounting 232(l)×136(w)×60(d) mm (9.1×5.4×2.4 inches); diameter: 112~140 mm (4.4~5.5 inches); 0.7 kg (1...
Page 26
Installation guide 25 corner thin box 300(l)×164(w)×222(d) mm (11.8×6.5×8.7 inches); 3 kg (6.7 lbs); supplied with washer×4, m8*16 screw×4 and spring washer×4. Power box can be set inside the thin box. Corner wide box 232(l)×234(w)×210(d) mm (9.1×9.2×8.3 inches); 2.7 kg (6 lbs); supplied with washer...
Page 27
Installation guide 26 pole wide box 270(l)×166(w)×155(d) mm (10.6×6.5×6.1 inches); 3.2 kg (7.1 lbs); supplied with m8*16 screw×4, washer×4, spring washer×4, stainless steel straps×4. Power box can be set inside the wide box. Wall box mounting 270(l)×166(w)×95(d) (10.6×6.5×3.7 inches); 2.2 kg (4.84 l...
Page 28
Installation guide 27 other application accessories repeater/converter d77r1: rs-485/rs-232 converter d77r2: rs-232 between rs-485/rs-442 d77r3: bi-phase to rs-485/rs-422 d77r1 d77r2 d77r3 power box white, 186.5×147 mm (7.3×5.8 inches); 2.6 kg (5.8 lbs) p1030 (input: 110~115vac/output: 24vac 72va) p...
Page 29: 4.3
Installation guide 28 4.3 ceiling mounting with straight tube the straight tube is available in different length: 25 cm and 30 cm. Items needed: • dome camera • outdoor mount kit (supplied) • data cable (supplied) • ethernet cable (ip dome camera) • straight tube and equipped items (optional accesso...
Page 30
Installation guide 29 ceiling mount: straight tube + outdoor mount kit.
Page 31: 4.4 Wall
Installation guide 30 4.4 wall mount the dome camera can be mounted on the wall with compact pendent mount, standard pendent mount and wall box. Please follow the installation instructions below for mounting the dome camera via different ways. 4.4.1 compact pendent mount items needed: • dome camera ...
Page 32
Installation guide 31 3) attach the waterproof rubber to the compact pendent mount. 4) run the cable(s) through the compact pendent mount with the data cable’s 22-pin cable coming out of the outlet. Note: please block the cable entry hole with the supplied sponge to avoid insects entering the penden...
Page 33: 4.4.2
Installation guide 32 4.4.2 standard pendent mount items needed: • dome camera • outdoor mount kit (supplied) • data cable (supplied) • ethernet cable (ip dome camera) • standard pendent mount and equipped items (optional accessory) • waterproof rubber (supplied) • m5 standard/security screw (suppli...
Page 34
Installation guide 33 wall mounting: standard pendent mount + outdoor mount kit.
Page 35: 4.4.3
Installation guide 34 4.4.3 wall box mounting items needed: • dome camera • outdoor mount kit (supplied) • data cable (supplied) • ethernet cable (ip dome camera) • standard/compact pendent mount and equipped items (optional accessory) • wall box mounting (optional accessory) • waterproof rubber (su...
Page 36
Installation guide 35 7) join the dome camera to the outdoor mount kit with the supplied m5 screw and washers. Wall box mounting: wall box mounting + standard/compact pendent mount + outdoor mount kit.
Page 37: 4.5 Corner
Installation guide 36 4.5 corner mount 4.5.1 corner standard mounting plate/corner plate mini items needed: • dome camera • outdoor mount kit (supplied) • data cable (supplied) • ethernet cable (ip dome camera) • standard/compact pendent mount and equipped items (optional accessory) • corner standar...
Page 38
Installation guide 37 mount kit to the standard/compact pendent mount with the supplied screws and washers. Then adjust the waterproof rubber to the joint. 6) connect the cable(s) to the dome camera. 7) join the dome camera to the outdoor mount kit with the supplied m5 screw and washers. Corner wall...
Page 39: 4.5.2
Installation guide 38 4.5.2 corner thin/wide box mounting items needed: • dome camera • outdoor mount kit (supplied) • data cable (supplied) • ethernet cable (ip dome camera) • standard/compact pendent mount and equipped items (optional accessory) • corner thin/wide box (optional accessory) • waterp...
Page 40
Installation guide 39 6) connect the cable(s) to the dome camera. 7) join the dome camera to the outdoor mount kit with the supplied m5 screw and washers. Corner box mounting: corner thin/wide box + standard/compact pendent mount + outdoor mount kit.
Page 41: 4.6 Pole
Installation guide 40 4.6 pole mount 4.6.1 pole thin/wide direct mounting items needed: • dome camera • outdoor mount kit (supplied) • data cable (supplied) • ethernet cable (ip dome camera) • standard/compact pendent mount and equipped items (optional accessory) • pole thin/wide direct mounting (op...
Page 42
Installation guide 41 6) connect the cable(s) to the dome camera. 7) join the dome camera to the outdoor mount kit with the supplied m5 screw and washers. Pole direct mounting: pole thin/wide direct mounting + standard/compact pendent mount + outdoor mount kit.
Page 43: 4.6.2
Installation guide 42 4.6.2 pole thin/wide box mounting items needed: • dome camera • outdoor mount kit (supplied) • data cable (supplied) • ethernet cable (ip dome camera) • standard/compact pendent mount and equipped items (optional accessory) • pole thin/wide box mounting (optional accessory) • w...
Page 44
Installation guide 43 pole box mounting: pole thin/wide box + standard/compact pendent mount + outdoor mount kit.
Page 45: 5. System
Installation guide 44 5. System expansion 5.1 connecting with power box a power box contains a 24v ac adapter, two terminal blocks (for communication and power) and one alarm board. With an ip66 case, the power box is ideal for outdoor installation environment. Two models are available: 100~115v ac ...
Page 46: 5.2
Installation guide 45 5.2 data formats transforming to integrate other surveillance devices with the speed dome cameras, we provide three kinds of converter/repeater to transform the communication formats between devices. If a converter/repeater is used, the total network distance of the surveillanc...
Page 47: 5.3 Signal
Installation guide 46 5.3 signal distribution the rs-485 signal distribution unit (sdu) is designed to relay control codes to speed dome cameras. It is capable of communicating with cameras up to 1.0 kilometers away. Additionally, the sdu can be installed in either “star” or “daisy chain” configurat...
Page 48: 5.4 Coaxial
Installation guide 47 5.4 coaxial telemetry the coaxial telemetry is a low-cost solution to long distance connection between dome cameras and controlling devices (e.G. Dvr and keyboard). It simplifies the work of wiring by transmitting video and rs-485 control signals via one bnc line, so that to br...
Page 49: 6. System
Installation guide 48 6. System integration the dome camera is allowed to be integrated into other suppliers' surveillance systems with large set of built-in protocols. Refer to the following sections for more information. 6.1 using pelco keyboard the speed dome camera can be controlled through a pe...
Page 50: 6.2 Using
Installation guide 49 cable definition (d protocol keyboard to ptz camera) fo r sp e e d do m e fo r d pro to c o l ke yb o a rd tx- tx+ gnd rx- rx+ 1 2 3 4 5 6 tx - tx+ gnd rx- rx+ 1 2 3 4 5 6 gnd 6.2 using philips allegiant keyboard the dome cameras can be integrated into philips allegiant systems...
Page 51
Installation guide 50 appendix a: technical specification items indoor mini ptz camera camera ccd sensor 1/4" exview ccd optical zoom 12x digital zoom 1× ~ 12× variable ntsc 380k effective pixels pal 440k horizontal resolution 540 tvl scanning system ntsc / pal synchronization internal / line lock v...
Page 52
Installation guide 51 home function preset, sequence, auto pan, cruise auto flip digital / mechanical / off digital slow shutter on / off motion detection on / off wide dynamic range on / off day/night: ir cut filter on / off image freeze on / off image inverse on / off 2d on / off noise reduction 3...
Page 53
Installation guide 52 **motion detection function is available in 2010 q3. **all specifications are subject to change without notice..