Garland XE24 Installation, Operating & Service Instructions - Operation Continued
Part # 4517125 (09/03)
Page 12
OPERATION continued
buttons at the same time, starting the cooking time
countdown.
NOTE: If the display reads either “TOO COOL”
or “TOO HOT” the controller will not initiate a
cooking sequence.
3. Perform the required functions as they are
displayed, i.e.; sear, turn. To cancel the audible
alerts, press the BLACK button.
CAUTION: Pressing the GREEN (‘CANCEL/
RAISE’) button will cancel the cooking cycle, and
pressing any other button on the controller will
cancel the alarm.
4. When the cooking time has been completed, the
“PRODUCT NAME” and “REMOVE” will
be displayed with an audible alert. Cooking is
complete. Remove product.
Enter Standby
Mode:
1. Select Sandby Mode by pressing
or
until
“STANDBY” is displayed.
NOTE: If the display reads either “TOO COOL”
or “TOO HOT” the upper platen will not go into
Standby Mode.
2. Press the GREEN (‘CANCEL/RAISE’) and the
BLACK buttons at the same time. As soon as the
upper platen moves down, the display will read
“STANDBY MODE.”
Exit Standby Mode:
1. Press the GREEN (‘CANCEL/RAISE’) button.
The upper platen will raise and the display will read
“CANCEL” with an audible alarm.
To Display the Current Temperatures:
1. Press the button and repeat for each zone to be
displayed...
1st press - LOWER GRILL ZONE
2nd press - UPPER PLATEN
NOTE: The temperatures may be displayed at any
time, including during a cooking cycle.
To View Settings for a Menu Item:
1. Enter Programming; Menu Items,
(see Programming)
2. Press
to enter “PROGRAMMING MODE
MENU ITEMS”
3. Use and to choose the desired Menu Item.
4. Press
to scroll through the settings for the
chosen item.
To Clean the Grill:
1. Press the
or
button to obtain the menu
item “CLEAN MODE.” The temperature is also
displayed.
2. Press to acknowledge that Clean Mode is desired.
This will cause the appliance, (grill and platen, if
selected), to heat to the Clean Temperature.
3. “READY TO CLEAN” will be displayed when the
grill is at the proper cleaning temperature and an
audible alarm will sound.
4. Press
. The temperature control and platen
will be turned off and the display will show
“CLEANING.”
5. To exit Cleaning Mode, Press . The Display will
show “OFF.”
When cleaning is completed, you may turn the
“MASTER POWER” (rocker) switch off.