Garland XE24 Installation, Operating & Service Instructions - Programming Continued
Part # 4517125 (09/03)
Page 18
PROGRAMMING continued
Menu Items...
To Change the Cook Time of a Product:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.
3. Press
to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS”
will be displayed.
4. Press
. “MENU ITEMS STANDBY” will be
displayed.
5. Use and to choose the desired Menu Item.
6. Press
to display “(MENU ITEM) COOK
TIME XX:XX”
7. Use and to adjust the cook time.
8. Press to save the changes.
9. Press to return to “PROGRAMMING MODE
MENU ITEMS”
10. Press again to exit.
To Turn Platen, (2-Sided), Cooking On/Off:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.
3. Press
to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS”
will be displayed.
4. Press
. “MENU ITEMS STANDBY” will be
displayed.
5. Use and to choose the desired Menu Item.
6. Press twice to display “(MENU ITEM) UPPER
PLATEN YES/NO “
7. Use and to turn upper platen on or off.
8. Press to save the changes.
9. Press to return to “PROGRAMMING MODE
MENU ITEMS”
10. Press again to exit.
To Change Upper Platen Set Temperature:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.
3. Press
to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS”
will be displayed.
4. Press
. “MENU ITEMS STANDBY” will be
displayed.
5. Use and to choose the desired Menu Item.
6 Press
three, (3) times to display “(MENU
ITEM) UPPER TEMP XXX” displayed in °F or
°C.
7. Use
and
to change the set temperature to
the desired value.
8. Press to save the changes.
9. Press to return to “PROGRAMMING MODE
MENU ITEMS”
10. Press again to exit.
To Change Grill Set Temperature:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.
3. Press
to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS”
will be displayed.
4. Press
. “MENU ITEMS STANDBY” will be
displayed.