Garmin GMX 200 Installation Manual - page 22
Page 3-4
GMX 200 Installation Manual
Revision F
190-00607-04
3.4.2
58B
Backshell Assembly and D
-
Subminiature Connectors
The GMX 200 main connector kit (P/N 011-01283-00) includes one Garmin backshell assembly and one
Garmin ground adapter assembly and is used by both the GMX 200 and GMX 200 I/O models. The
GMX 200 I/O connector kit (P/N 011-01283-01) includes one Garmin backshell assembly and one
Garmin ground adapter assembly and is used by the GMX 200 I/O models only. Backshell connectors
give the installer the ability to terminate shield grounds at the backshell housing using the Shield Block
ground kit.
X
Table 3-3
X
lists Garmin part numbers for the GMX 200 D-Sub Connectors and the Backshell
Assembly.
Table 3-3. Backshell Assembly
X
Figure 3-1
X
Ref
Description
Garmin P/N
Notes
1
Cast Housing (From Garmin Backshell kit.)
125-00084-00
[3]
2 Shield
block
117-00147-01
[4]
3
Screw, 4-40 x.250, FLHP100
°, SS/P, Nylon.
211-63234-08 [4]
4
Multiple Conductor Shielded Cable
(See Interconnect Diagrams,
X
Appendix E
X
)
As Required
[5]
5
Shield Terminator
As Required
[5], [6]
6
Wire, Insulated (20 – 22 AWG)
As Required
[5], [6]
7
Socket Contacts
336-00022-00, or
336-00055-00
[1]
[2]
8
Ring terminal, #8, insulated, 18
-
22 AWG, 14
-
16
AWG
MS25036-149,
MS25036-153,
MS25036-156
[5]
9
Screw, PHP, 8
-
32x.312", Stainless or Cad Plated
Steel
MS51957-42,
MS35206-242
[5]
10
Split Washer, #8, (.045" compressed thickness)
Stainless or Cad
-
plated steel
MS35338-137,
MS35338-42
[5]
11
Flat Washer, #8, .032" thick, .174"ID, .375" OD,
Stainless or Cad Plated Steel
NAS1149CN832R,
NAS1149FN832P
[5]
12
Silicon Fusion Tape
249-00114-00
[5]
13 Strain
Relief
115-00499-03 [3]
14
Screw,4
-
40x.375,PHP,SS/P,w/Nylon
211-60234-10 [3]
15 Cover
115-00500-03 [3]
16
Screw,4
-
40x.187,FLHP100,SS/P,w/Nylon
211-63234-06 [3]
[1] Supplied as part of GMX 200 Connector Kit P/N 011-01283-00.
[2] Supplied as part of GMX 200 I/O Connector Kit P/N 011-01283-01.
[3] Supplied as part of Backshell Kit P/N 011-00950-03 (included in kits 011-01283-00 and 011-01283-01).
[4] Supplied as part of Ground Adapter Kit P/N 011-01169-01 (included in kits 011-01283-00 and 011-01283-01).
[5] Not supplied – must be purchased separately.
[6] Solder sleeve with pre-installed lead may be used instead of items 5 and 6.