Garmin GMX 200 Installation Manual - page 38
NOTE
The following sections describe all available configuration options. Depending
upon the model of GMX 200 being installed, the described options may or may
not be available for a particular unit.
5.3.1
67B
Enable/Disable Functions
This menu allows the activation or deactivation of GMX 200 functions. Ensure the Enable/Disable
Functions page of the GMX 200 has the desired configuration. Modifications can be made using the line
select key beside the appropriate function to toggle between Enabled and Disabled. Record all of the
settings in the checkout log sheet provided in
X
Table 5-3
X
.
The Chart function is automatically enabled when one of the following two events occur:
1.
A datacard containing FliteChart files is detected by the software OR
2.
ChartView has been activated with an activation card (see Section
X
5.3.4
X
) and the software detects
ChartView files on the datacard.
1.
If not already on the Function menu, press the FUNC smart key to bring up the Enable/Disable
Functions menu. Enable or disable functions as required.
a.
Message: Enable to allow viewing of system messages.
b.
Custom Map: Enable to allow viewing of the Custom Map function.
c.
IFR Enroute Map: Enable to allow viewing of the IFR Map function.
d.
VFR Sectional Map: Enable to allow viewing of the VFR Map function.
e.
Split Screen Function: Enable to allow viewing of two functions side by side.
Page 5-4
GMX 200 Installation Manual
Revision F
190-00607-04