Garmin GMX 200 Installation Manual - page 46
5.3.4
70B
ChartView Activation
The GMX 200 can display Jeppesen charts using the optional ChartView feature, which must be
activated. This section describes how to activate the ChartView feature in the GMX 200.
1.
Turn the GMX 200 off.
NOTE
The ChartView Activation Card only can only be used on one
GMX 200. A new ChartView Activation card must be used for each
GMX 200 that has the ChartView feature activated.
2.
Remove the database SD card from the front SD card slot and insert a ChartView Activation Card
P/N 010-00489-50.
3.
Turn the GMX 200 on – the GMX 200 will begin activating the ChartView feature.
4.
Wait for the message “ChartView Feature Unlocked. Please restart unit.” to appear. Turn off the
GMX 200, remove the activation card and insert the database card that was previously removed.
5.
Turn on the GMX 200 and wait for the power up sequence to complete
6.
Repeatedly press the FN key to display the available functions. Verify that the CHART function is
now available.
NOTE
The ChartView Activation Card must not be used to store database files,
including NavData, SafeTaxi, FliteChart, and ChartView.
5.3.5
71B
Activation of GDL 69 XM Satellite Radio
Refer to the latest revision of 190-00355-04 for activating XM Satellite Radio.
5.3.6
72B
Activation of the AV-300/350 FIS Datalink Radios
Refer to the latest revision of 190-00607-07 contained in the WSI Activation Kit for activating the WSI
FIS function in the GMX 200. The GMX 200 does not support the Sirius Satellite Radio audio function.
A subscription from WSI is required to receive FIS weather products. A separate subscription is required
to receive Sirius Satellite Radio audio. For both, refer to the WSI-AV300/350 Install Manual for
instructions.
Page 5-12
GMX 200 Installation Manual
Revision F
190-00607-04