I-mate JAMA 201 User Manual - page 33
Getting Connected
27
On the Home screen, click Start > Settings > Connections.
Click GPRS ( or Dial-up, if GPRS is not available to you).
Click Menu > Add.
Enter the following information, and click Done.
In Description, enter a name for the connection.
In Connects to, select the type of network to which you will connect.
In Access point, enter the Access Point Name (or server phone number).
In User name, enter your user name for the GPRS network, if required.
In Password, enter your password, if required.
In Primary DNS, enter the primary Domain Name System (DNS) address, if required.
In Secondary DNS, enter the secondary DNS address, if required.
In IP address, enter the Internet Protocol (IP) address for the device, if required.
The devce uses ths connecton when you open a program that connects to
the Internet.
Create a proxy connection
Dependent on your Mobile Service Provider’s configuration, you may need
to add a proxy connecton to allow your phone to access the Internet or WAP
servces. Every network connecton s dfferent and your servce provder wll
be able to advse f there s a requrement for ths. You should gather all of the
relevant nformaton or network settngs you need before startng ths process.
On the Home screen, click Start > Settings > Connections.
Click Proxy.
1.
2.
3.
4.
•
•
•
•
•
•
•
•
1.
2.