I-mate JAMA 201 User Manual - page 38
32 -mate | User Manual
Click "Add new device." Your device searches for other Bluetooth-enabled devices and
displays them in the list.
Select the device with which you want to create a Bluetooth partnership, and enter
the passcode.
Bluetooth devices either have user - configurable passcodes, or preset values,
whch are often set to 0000.
You can have more than one concurrent Bluetooth partnership. Once you create a
partnership, the Bluetooth-enabled devices do not need to be set to Discoverable to beam
information between them; Bluetooth only needs to be turned on. To receive files over
Bluetooth, first ensure that Beams are enabled, as explained in the next section.
End a Bluetooth partnership
On the Home screen, click Start > Settings > Connections > Bluetooth.
Select the Bluetooth partnership you want to end.
Click Menu > Delete.
Overview of Bluetooth virtual COM ports
Some programs can connect only though a seral (COM) port. Ths can be
true even f the devce tself s Bluetooth-enabled. To make t possble for
such programs to use a Bluetooth connecton, you must set up a vrtual COM
port. Once created, ths vrtual port can be used lke any other COM port. You
can use a vrtual COM port for programs that, for example, connect to a GPS
recever, or to connect to a Bluetooth-enabled prnter.
Set up an incoming or outgoing Bluetooth COM port
Make sure that your device is currently connected to the other device via Bluetooth.
On the Home screen, click Start > Settings >Connections> Bluetooth.
Select the device and Click Menu > COM Ports.
Click Menu > New Incoming/Outgoing Port.
Select a numbered COM port from the list.
To use this COM port to communicate only with devices with which your device has a
Bluetooth partnership, select the Secure Connection check box.
Click Done.
•
•
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.