Jcb JCB-SCMS210 Safety And Operating Manual - 4. The Laser

Laser ON/OFF Switch

4

4. THE LASER

This machine is equipped with a 

Laser Cutting Guide. This allows the 

operator to preview the path of the 

blade through the workpiece. The 

ON/OFF slide switch for the Laser 

Guide is positioned in the Right Hand 

edge of the Cutting Head ‘D’ handle. 

(See     ) Avoid direct eye contact 

with the laser beam, and do not use 

on material that could reflect the laser  

beam.

WARNING: Do not stare  

directly at the laser beam. 

A hazard may exist if you deliberately 

stare into the beam. Please observe 

all of the following 

SAFETY RULES

1) The laser beam must not be 

deliberately aimed at personnel 

and must be prevented from being 

directed towards the eyes of a 

person.

2)  Always ensure that the laser 

beam is used only on workpieces 

that have non-reflective surfaces, i.e. 

natural wood or matt surfaces etc.

3) Never exchange the laser 

module assembly for a different 

type or class of laser.

4) Repairs to the laser module must 

only be conducted by JCB Power 

Tools or their authorized agent.

4