Jcb JCB-SCMS210 Safety And Operating Manual - Cutting Head Travel

If necessary the pointer can be 

repositioned by loosening its 

fastening screw using a #2 Phillips 

screwdriver, adjusting as necessary 

and then tightening the fixing screw 

securely.

CUTTING HEAD TRAVEL

Cutting Head Downward Travel 

Adjustment (See      )

To prevent the blade from contacting 

any part of the machine metal base 

the downward travel of the Cutting 

Head can be adjusted.

Lower the Cutting Head and check 

for any blade contact with the 

machines base.

If the downward travel of the Cutting 

Head needs to be adjusted:

1. Loosen the locknut on the 

downward travel stop screw.

2. Turn the adjusting screw out 

(counter-clockwise) to decrease the 

downwards travel of the Cutting 

Head.

3. Turn the adjusting screw 

in (clockwise) to increase the 

downwards travel of the Cutting 

Head.

4. Tighten the adjustment screw 

locknut when satisfactory downward 

travel of the Cutting Head is 

achieved.

37