Jcb JCB-SCMS210 Safety And Operating Manual - 7. Adjustable Stop Plate

7

2) To replace, simply slide the 

deployable stand back into the 

machine base until the release button 

provides positive location. 

7. ADJUSTABLE STOP PLATE

A stop plate designed for use during 

repetitive cutting is incorporated 

into the Extension Arm on the Right 

Hand side of the machine base. The 

stop plate can be deployed in two 

positions, inboard and outboard.

To deploy the stop inboard:

1) Slide the spring-loaded release 

lock forwards. (See     )

2) Pull the stop from its stored 

position upwards and to the left. 

The stop will deploy to the inboard 

position. 

3) Slide the release lock backwards to 

lock the stop into position. (See     )

4) To stow away, reverse the above 

steps.

To deploy the stop outboard:

1) Slide the spring-loaded release 

lock forwards.,

2) Pull the stop from its stored 

position upwards and to the right. 

The stop will deploy to the outboard 

position. 

3) Slide the release lock backwards to 

lock the stop into position. (See     )

4) To stow away, reverse the above 

steps.

7

8

9

8

9