Jcb JCB-SCMS210 Safety And Operating Manual - Releasing The Cutting Head

RELEASING THE CUTTING HEAD

The Cutting Head will automatically 

rise to the upper position once it 

is released from the locked down 

position.        

It will automatically lock in the upper 

position.

To Release the Cutting Head from the 

Locked Down position:

1) Gently press down on the Cutting 

Handle.

2) Pull out the Cutting Head latching 

pin (See      ) and allow the Cutting 

Head to rise to its upper position. 

If Release is Difficult:

1) Gently rock the Cutting Head up 

and down.

2) At the same time twist the Head 

Latching Pin clockwise and pull 

outwards.

NOTE: We recommend that when 

the machine is not in use the Cutting 

Head is locked in its down position 

with the latching pin fully engaged in 

its socket.

15