K-Circle Base Module Instruction Manual - (3) Ape•shu
11
(3) APE•SHU
aperture • shutter
PRESS: aperture change, rotate knob to change values, press to exit
HOLD: shutter change, rotate knob to change values, press again to exit
(4) MOD•WB•TLS
mode • white balance • timelapse start
PRESS: mode change, rotate knob to change param, press to exit
HOLD: white balance change, rotate knob to change, press to exit
LONG HOLD: start timelapse (programming is possible only with external
software)
(5) SPD•CPS•REA
speed cut • command rate • reactivity
PRESS: switch focusing speed limits, blinks on settings
1 red blink = speed 1
2 red blinks = speed 1 + speed 2
3 red blinks = speed 2
4 red blinks = speed 2 + speed 3
3 green blinks = speed 1+2+3 (standard speed)
HOLD: USB command send rate, blinks on values change. When you enter the
function all led colors are off. Turn the knob, for every green blink you add a
command per second (cps). Every 10 cps added the led blinks red. To exit from
the function press the button again. The led become steady green again. Every
time you restart the procedure, the command count will start from 8 cps.