K-Circle Base Module Instruction Manual - Single Press:
9
Function selection works as follows:
•
SINGLE PRESS:
do the base function, singular press to activate.
•
SHORT HOLD:
do the second function - to activate hold down the button and release it when
the red led shortly blinks once.
•
LONG HOLD:
do the third function - to activate hold down the button and release it when
the red led shortly blinks twice.
•
EXIT:
to exit from a function, you have to press again the same button you used to
enter, or press the AF/Exit button at the top left of the controller.
In order to prevent the user does not recognize in which menu was entered,
the unit automatically exit a function while is in standby for at least 8 sec.
IMPORTANT NOTICES
• Keep turning the focusing knob after the lens has reached the end of focus
range may cause excessive wear of autofocus motor.
• Do not attempt to service/open the unit by yourself, there are sensitive
internal electrical circuits that can be damaged.
• Use ONLY the provided 8.4v li-ion battery charger
• Do not move focusing manually on the lens while operating the K-Circle, this
may cause saved focus points to become inaccurate.
• The system can have delays because is transmitting comands thru the USB
port, it’s not a realtime system.