K-Circle Base Module Instruction Manual - Status Led - Base Module
Manual is about: Wireless camera usb controller
of
24
7
STATUS LED - BASE MODULE
Once the main unit is turned on, the software automatically check for a valid
camera, if one is connected the main led turn orange for two seconds, then
become steady green. The camera is then associated.
short
status led
long
3 fast red blinks and 1 slow
green blink: no camera
detected
continuous red blinks while
the unit is not connected to
the DSLR means it’s needed
to replace batteries
long blink for 2 sec.: camera
associated
steady when normal
operation
steady while movie
recording
short blink every 5 sec.:
recharge battery
short green/off blink while
pulling focus or pressing
BWD, FWD
long
short