Kuppersbusch EKV 6500 Instruction Manual - page 4
A20. Tray
A21. On/stand-by button
Description of milk container and accessories
(page 3 - B)
B1. Frothed milk regulator
B2. Milk container handle
B3. CLEAN
button
B4. Milk intake tube
B5. Frothed milk spout
B6. Milk
frother
B7. Hot water spout
B8. Measure
B9. Water softener filter (if present)
Description of control panel
(page 3 - C)
N.B.! A light touch is enough to activate the icon.
C1. Display: guides the user in using the appliance.
C2.
icon to deliver a cup of coffee
C3.
icon to deliver two cups of coffee
C4.
icon to select the type of coffee (espresso, small cup, medium
cup, large cup, mug)
C5.
icon : to perform a brief rinse to heat the infuser.
C6.
icon to deliver hot water
C7.
icon to select the coffee taste
C8/C11
icons to scroll forwards or backwards through the menu
and display the various modes
C9. ESC icon to exit the selected mode
C10. M icon to activate or deactivate menu parameter setting mode
C12. OK icon to confirm the selected function
C13.
icon to deliver cappuccino
PRELIMINARY CHECKS
Controls after transport
After removing the packaging, make sure the product is complete and un-
damaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services.
Installing the appliance
Attenzione!
When installing the appliance, respect the following safety warnings:
•
Installation must be performed by a qualified professional in com-
pliance with legislation in force in the country of installation (see Built-
in installation).
•
The packing elements (plastic bags, polystyrene foam, etc.) should be
kept out of reach of children.
•
Do not install the appliance in rooms where the temperature may drop
to 0°C or lower.
•
Customise the water hardness as soon as possible following the in-
structions in the "Setting water hardness" section.
Connecting the appliance
Danger! Check that the mains power supply voltage corresponds
to the value indicated on the appliance rating plate.
Connect the appliance to an efficiently earthed and correctly installed soc-
ket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance, have the soc-
ket replaced with a suitable type by a qualified professional.
To comply with safety directives, an omnipolar switch with a minimum con-
tact distance of 3 mm must be installed.
Do not use multiple sockets or extensions.
To learn to use the appliance correctly, the first time you use it follow the
detailed instructions in the following sections.
Important! Safety cutout devices must be included in the mains
power supply in compliance with the installation regulations in the country
concerned. .
AUTOMATIC CUP TRAY LIGHT
When the appliance is turned on, the led (A6) automatically light up the
spout and cup tray.
The lights stay on until the appliance is turned off.
While coffee, steam or hot water is being delivered, the cooling fan comes
on.
At the end of the function, the cooling fan remains on to avoid condensa-
tion forming inside the cabinet. After several minutes, the fan goes off au-
tomatically.
N.B.: The appliance also completes this cycle if switched off by pres-
sing On/stand-by button (A21) (fig. 1).
Important! Do not look at the lights directly or using an optical in-
strument.
8