Kuppersbusch EKV 6500 Instruction Manual - page 6
x 16
x 2
approx. 350mm
x 1
x 4
x 4
560 + 1 mm
Position the rails on the sides of the cabinet as shown in the figure. Fix
with the screws supplied, then extract them completely. If the coffee maker
is installed over a warmer drawer, use the top surface of this as a reference
to position the rails.
In this case, there will be no surface to rest the rails on.
Fix the power cable with the clip to avoid it tangling when the appliance is
inserted or extracted.
The power cable must be long enough to allow the appliance to be
extracted from the cabinet to fill the coffee beans container.
The appliance must be earthed in compliance with legislation.
Electrical connections must be performed by a qualified electrician in
compliance with the manufacturer's instructions and legislation in
force in the country of installation.
The electrical socket must be accessible.
Position the appliance on the rails, making sure the pins are correctly in-
serted in the housings, then fix it with the screws supplied.
If necessary, correct alignment of the appliance by positioning the spacers
supplied under or at the sides of the support.
10