LabStyle Dario User Manual - page 29

Chapter 3 - Checking Your Dario™ Glucose Meter

Checking the Glucose Meter With the Check strip

25

The glucose concentrations in these solutions, when measured by 

systems other than Dario™ Glucose Monitoring System, may differ.

Applying too much or too little control solution to the test strip may 

cause out- of-range results.

Do not use your Dario™ Glucose Monitoring System to test your blood 

if your control solution result falls outside of the acceptable range.

14. Place the meter back into the housing:

a. Hold the meter at a angle with the part that connects to the smart mobile 

device facing away from the ridged orange panel.

b. Push the meter into the housing at an angle and then push downwards until the 

meter clicks into place.

CheCkinG The GluCose MeTer WiTh The CheCk sTriP

1.  Open the Dario™ application.

2.  Connect the Dario™ meter to the smart mobile device as described in the 

previous section.

3.  Insert the Dario™ Check Strip into the test strip port. A Check strip detected 

message appears. The border of the circle is gradually filled with blue, indicating that 

the test is in progress.