LabStyle Dario User Manual - page 38
Chapter 4 - Testing Your Blood Glucose Level
step Three- remove a Test strip From the Cartridge
34
3. Grasp the meter with two fingers and remove from the housing.
Do not plug the Dario™ meter into any device other than a compatible
smart mobile device audio socket. The list of compatible smart
mobile devices is provided in
Chapter 7 – Technical Information &
Specifications.
sTeP Three- reMove a TesT sTriP FroM The CarTridGe
You should have a test strip cartridge already inserted in your Dario™ housing. If
this is not the case, please go to
Inserting the Test Strip Cartridge on page 10
.
1. Wash your hands with warm soapy water and dry thoroughly. If you use alcohol
wipes to cleanse fingers, make sure the area is completely dry before lancing
finger.
2. Remove the Cartridge Cover of the Dario™ housing by pushing it outwards until
it comes off (use the removal indication lines).