LaCie 12big Rack Fibre 8 Quick Install Manual - Introduction
LaCie 12big Rack Fibre 8
Introduction
Quick Install Guide
page 2
Introduction
1.
Safe Handling
1.1.
Safety
1.2.
caution:
If this equipment is used in a manner not
specified by LaCie, the protection provided by the equipment
may be impaired.
caution:
The RJ45 socket on the RAID Controller is for
Ethernet connection only and must not be connected to a
telecommunications network.
iMPoRtant note:
Class 1 Laser Product. The LaCie
12big Rack Fibre 8 RAID Controller is supplied with optical
SFP Transceiver modules. They contain a laser that
complies with Laser Class 1, US 21 CFR (J) & EN 60825-1,
UL (NRTL) and TUV.
iMPoRtant:
The optical modules provided and installed by
the end user must be a UL (or other North America NRTL)
RECOGNIZED COMPONENT and must be approved by TUV
(or other European product safety test house), and the laser in
the module must comply with Laser Class 1, US 21 CFR (J)
and EN 60825-1).
Rack System Precautions
1.3.
PCM Operation
1.4.
WaRninG:
Do not remove the covers from the PCM. Danger of
electric shock inside. Return the PCM to LaCie for replacement.
WaRninG:
Do not remove a PCM unless a replacement can
be installed immediately. The enclosure must not be operated
without all modules in place.
ESD Precautions
1.5.
Battery Disposal
1.6.
WaRninG:
There is a danger of explosion if the battery is
disposed of improperly. Dispose of used batteries in accordance
with LaCie’s instructions and national regulations.
caution:
There is a danger of explosion if the RAID
Controller battery is disposed of improperly. Dispose of
used batteries in accordance with LaCie’s instructions and
national regulations.