Lantech IES-2208CA User manual - page 106
Manual is about: 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo
Managed Industrial Switch
of
139
99
Pin out of PoE Endspan Hub/Switch
Pin
Signal / Name
1
TX+/VCC+
2
TX-/VCC+
3
TX+/VCC-
4
5
6
TX-/VCC-
7
8
Note
‘+’ and ‘-‘ signs represent the polarity of the wires that make up each wire pair.
Before you power PD, please check the RJ-45 connector pin assignment
follow IEEE802.3af standard; otherwise you may need to change one of the
RJ-45 connector pin assignment attached with the UTP cable.