Lantech IES-2208CA User manual - page 32
25
5.3 Login in the Console Interface
When the connection between Switch and PC is ready, turn on the PC and run a
terminal emulation programor Hyper Terminal and configure its communication
parameters to match the following default characteristics of the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
The settings of communication parameters
Having finished the parameter settings, click
‘OK’. When the blank screen shows up,
press Enter key to have the login prompt appears. Key in
‘root’ (default value) for both
User name and Password (use Enter key to switch), then press Enter and the Main
Menu of console management appears. Please see below figure for login screen.
Console login interface