Lantech IES-2208CA User manual - page 109
102
192.168.1.254
ip dhcp
G
Enable DHCP client
function of switch
switch>enable
switch#configure
switch(config)#ip dhcp
show ip
P
Show IP information of
switch
switch>enable
switch#show ip
no ip dhcp
G
Disable DHCP client
function of switch
switch>enable
switch#configure
switch(config)#no ip dhcp
SNTP Commands Set
Netstar Commands
Level Description
Example
sntp enable
G
Enable SNTP function switch>enable
switch#configure
switch(config)#sntp enable
sntp ip
[IP]
G
Set SNTP server IP, if
SNTP function is
inactive, this
command can
’t be
applied.
switch>enable
switch#configure
switch(config)#sntp ip
192.168.16.1
sntp timezone
[Timezone] Format:
[1~63]
G
Set timezone index,
use
“show sntp
timzezone
” command
to get more
information of index
number
switch>enable
switch#configure
switch(config)#sntp timezone 22
sntp daylight
G
Enable daylight saving
time, if SNTP function
is inactive, this
command can
’t be
applied.
switch>enable
switch#configure
switch(config)#sntp daylight
sntp daylight-period
[Start time] [End time]
G
Set period of daylight
saving time, if SNTP
switch>enable
switch#configure