Lantech IES-2208CA User manual - page 23
Manual is about: 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo
Managed Industrial Switch
of
139
16
3.4 Wiring the Power Inputs
Please follow the steps below to insert the power wire.
1. Insert AC or DC power wires into the contacts 1 and 2 for power 1, or 5 and 6 for
power.
2. Tighten the wire-clamp screws for preventing the wires from loosing.
[NOTE]
The wire gauge for the terminal block should be in the range between 12 ~ 24
AWG.