Loewe Individual 32 Compose Sound LED Operating Instructions Manual - page 115
115 -
english
Connecting active loudspeakers
➠ Only for devices with integrated digital multi-channel audio decoder
(see equipment and upgrade possibilities on page 137).
If you want to use another similar speaker system or active speakers,
you can connect these to the AUDIO LINK interface of the TV set with
an adapter cable.
A comparable speaker system is connected in a similar way to that de-
scribed above for “subwoofer without AUDIO LINK interface”.
The adapter cable is available from your dealer (see Accessories, page 136).
Connecting active speakers
Switch off all devices before connecting.
Plug the adapter cable into the AUDIO LINK interface of the TV set. Con-
nect the cinch connections of the adapter cable to the connections of
the corresponding active speakers.
The cinch connections of the adapter cable are labelled:
R for Front right
SR for Surround right
L for Front left
SL for Surround left
C for Centre
SUB for Subwoofer
The connections on the adapter cable are preamplifier outputs. Therefore,
only active speakers may be connected directly to the adapter cable.
R
SR
SL
L
C
SUB
R
SR
SL
C
SUB
L
Adjusting the speaker system
➠ Only for devices with integrated digital multi-channel audio decoder
(see equipment and upgrade possibilities on page 137).
Calling the sound components wizard
➠ In normal TV mode, without other displays.
MENU: Call TV menu.
Select Connections,
go to the menu line below.
Select Sound components,
OK calls the sound components wizard.
Sound playback via ... speakers system
Enter here that you want to hear the TV sound over a speaker system.
If you connect active speakers, please use the setting Speaker system.
Mark Speaker system,
OK to continue.
If nothing has been set yet, the factory settings or other-
wise the last set values are displayed.
continued on the next page
p
OK
OK
SOUND COMPONENTS
Sound playback via ...
TV speakers
6SHDNHUV\VWHP ۪
HiFi/AV amplifier
Sound projector
HiFi/AV amplifier or TV speakers (switchable)
Sound projector or TV speakers (switchable)
Proceed
SOUND COMPONENTS WIZARD
Please specify here via which sound components you want to listen to your TV
sound. If you select a "Speaker system", this must be connected to the
AUDIO LINK socket on the back of the TV set (with an additional adapter if
necessary).
If your TV has no built-in speakers, the sections relating to "TV-speakers" may
not be selected.
TV
TV
90Hz
90Hz
4,0m
4,0m
TV
TV
0dB
0dB
TV
TV
OK
SOUND COMPONENTS
Speaker system
Configuration/modification
Proceed
SOUND COMPONENTS WIZARD
Please specify whether you want to change the illustrated setting of your
speaker system or whether all existing settings are to be reset to the values
of the delivery state.
Components Distances Level
Reset to factory settings
OK
Adapter cable
TV set
Connection of active speakers to the TV set
External devices
Front
right
Front
left
Surround
left
Surround
right
Centre
Subwoofer