Loewe Individual 32 Compose Sound LED Operating Instructions Manual - page 61

61 -

english

Media+

Configuration of the built-in LAN adapter

You will see an overview of the current settings for the 

selected network adapter (for an explanation of the points, 

see page 62).

  OK  Change settings for the network adapter.

  Select type of IP configuration.

Manual:   

 Enter your fixed static IP address manually 

(see below).

Automatic:   Automatic configuration of the IP address 

via DHCP server or via multiple protocols 

according to UPnP specification (including 

DHCP).

  OK  Proceed.

If manual has been selected under IP configuration:

   Enter IP, Subnet mask, Gateway and DNS server 

addresses in succession with the numeric keys on 

the remote control.

  OK  Proceed.

You will now see an updated overview of the settings for 

the network adapter.

  OK  End of wizard.

 Configuration of a wireless adapter (e.g. WLAN bridge adapter)

 (1

You will see an overview of the current settings of the 

network adapter (see left column).

  OK  Change settings for the network adapter.

The TV set now searches for wireless routers.

Red button: Stop search.

After the end of the search:

  Select required base station from the options found.

  OK  Proceed.

If the desired access point is not found:

Red button: 

Repeat the search. Or:

Yellow button:   Specify base station manually, e.g. if the 

SSID of the access point is not transferred. 

Same procedure as for Rename station, 

see page 42.

If your wireless network has an encryption:

Numeric buttons:   Enter WLAN password (procedure same 

as Rename stations, see page 42).

Green button: 

Switch from lower case to capital letters 

and vice versa.

  Delete last character.

➠  Contact your network administrator if you do not 

know the WLAN code.

➠ For encryption types supported, see page 134.

For WEP encryption: 

  Select  the  WEP index,

  OK Proceed.

  Select type of IP configuration (see left column).

You will now see an updated overview of the settings for 

the network adapter.

  OK  End of wizard.

OK

NETWORK WIZARD: WIRED

Current adapter settings:

IP 

configuration 

Manual

IP 

address           

192.168.2.123

Subnet 

mask          

255.255.255.0

Gateway                        

192.168.2.1

DNS server 1                     

192.168.2.1

DNS server 2                     

192.168.2.1

Additional adapter data:

MAC 

address          

00:09:82:11:99:11

Change settings

(1

  Only for TV sets with WLAN functionality, see table on page 137.