Loewe Individual 32 Compose Sound LED Operating Instructions Manual - page 44
- 44
english
Picture in Picture ( PIP)
The concurrent display of two different images is referred to as Picture
in Picture.
Restrictions for the PIP mode:
➠ The selection and combination options for main screen/PIP screen
basically depend on the device variant (with/without digital recorder)
and the number of receivers (tuners) of the TV set (see Equipment
variants on page 137).
➠
In the case of TV sets that are only equipped with one DVB-T/C single
tuner, the PIP operation is restricted to AV-PIP (one DVB TV station
and one AV source). If a satellite tuner is fitted subsequently in these
devices, PIP operation is also possible from a digital satellite picture
and picture via antenna/cable (analogue or DVB-T/C).
➠ A concurrent representation of two MPEG4 coded HDTV signals is
not possible.
➠ A concurrent representation of two coded stations is not possible.
➠ Simultaneous display of two analogue stations is not possible.
➠ Picture change and station selection is restricted during recording.
➠ PIP Mode is not accessible as long as an HbbTV application is active
(see page 78).
The PIP operation distinguishes between two functionalities:
iPIP Only in sets with DR+: The TV picture is moved to the PIP
picture when you start the iPIP mode. The station of the
TV picture is now freely selectable. When you exit iPIP
mode the PIP picture becomes the TV picture again and
the PIP window is closed.
An orange frame around the PIP picture shows the iPIP
functionality
Standard PIP Stations freely selectable and changeable for PIP and TV
picture (coloured buttons have PIP-specific meaning, see
right hand column).
A green frame around the PIP picture indicates that the
station selection affects the PIP picture. A white frame
means that the operation refers to the main picture. If the
frame is blue, the station play is active in the PIP picture.
iPIP
Starting and ending iPIP mode
On pressing the PIP button the currently displayed TV
picture becomes the PIP picture. You can select other
stations for the TV picture and still keep an eye on the
PIP picture. You can temporarily shift commercials or
programme sections to the PIP picture in this way.
The PIP picture becomes the TV picture again (PIP off).
Standard PIP
Starting and ending standard PIP mode
Show/hide PIP.
Select the PIP picture
➠ The frame is green,
if not, press the green button.
Select the station as usual.
Select the station for the main picture
➠ The frame is white,
if not, press the green button.
Select the station as usual.
Function of the coloured buttons in standard PIP functionality
➠ The frame is green,
if not, press the green button.
Red button: Freeze picture in PIP on / off.
Yellow button: Switches contents of TV picture and PIP
picture.
Blue button: Start/stop PIP scan in the PIP picture.
Picture in Picture
=') ۷
17.00-18.30 Flora
&
Fauna