Loewe Individual 32 Compose Sound LED Operating Instructions Manual - page 26
- 26
english
DiSEqC one
cable
communal
system
Satellite
selection
LNB
frequencies
Manual
registration
(for socket
ANT SAT)
Transmission
channel /frequency
PIN protection
Setting options for the satellite system
(max. 4 satellites on DiSEqC multiswitch):
Select and adapt settings for the DiSEqC multi-
switch.
The refresh rate determines how often a DiSEqC
command is output. A refresh is only necessary with
cascaded systems.
The control voltage controls the switching of the
polarisation level (horizontal/vertical) in non-DiSEqC
capable components (e.g. control of single LNBs via
DiSEqC multiswitch).
The 22kHz signal controls the switching between high
and low band in the Band setting. The Position setting
controls the selection of the satellites in non-DiSEqC
capable components.
The Toneburst controls the selection of the satellites in
non-DiSEqC but toneburst capable components with the
Position and Option settings.
OK Proceed
Select Satellite 1 ... Satellite 4,
select satellites from list,
OK Proceed.
Set LNB frequencies.
You do not normally need to change the values.
OK Proceed.
(with Setting options for DVB-S reception (continued)
on page 27).
Setting options for the satellite system
(DiSEqC one cable communal system):
Select DiSEqC single cable communal installation.
OK Proceed.
Select satellites from list,
OK Proceed.
Set LNB frequencies.
Normally, you do not need to change the values for
high and low band, unless the LNC (LNB) of your
satellite system uses a different oscillator frequency
(important for the frequency display).
OK Proceed.
Select and adjust settings for the DiSEqC single
cable communal installation.
Select the desired transmission channel and the corre-
sponding transmission frequency.
If your system is designed for it, it is possible to protect
your used transmission data from use by other subscrib-
ers with a PIN.
OK
Proceed.
(with Setting options for DVB-S reception (continued)
on page 27).
Initial installation
Settings
DiSEqC
multiswitch
Repeat rate
Control
voltage
22kHz signal
Toneburst
Satellite
selection
LNB
frequencies
OK
INITIAL INSTALLATION (DVB-S)
Repeat
rate
none
1 2
Control voltage 13/18V on
22kHz
signal
Band
Toneburst
off
Proceed
Back
OK
INITIAL INSTALLATION (DVB-S)
Satellite selection
Satellite
1
Astra1
19,2°E
...
Satellite 2 Hot Bird 13°E
Satellite 3 Eutelsat W2 16°E
Satellite
4
none
Proceed
Back
OK
INITIAL INSTALLATION (DVB-S)
LNB frequencies
ASTRA1 19,2°E Low band 9750 MHz
ASTRA1 19,2°E High band 10600 MHz
Hot Bird 13°E Low band 9750 MHz
Hot Bird 13°E High band 10600 MHz
Eutelsat W2 16°E Low band 9750 MHz
Eutelsat W2 16°E High band 10600 MHz
Proceed
Back
OK
OK
INITIAL INSTALLATION (DVB-S)
Select DiSEqC single cable communal installation
DELTA SUM-514
DELTA SUM-516
DELTA SUM-518
DELTA SUM-918
DELTA SUM-928
KATHREIN EXR-551
KATHREIN EXR-552
KATHREIN EXR-501
Proceed
OK
INITIAL INSTALLATION (DVB-S)
Satellite selection
Satellite
1
Astra1
19,2°E
...
Proceed
Back
OK
Proceed
Back
INITIAL INSTALLATION (DVB-S)
LNB frequencies
Low
band
9750
MHz
High
band 10600
MHz
OK
INITIAL INSTALLATION (DVB-S)
Manual registration (for socket ANT SAT)
Transmission
channel
1
2 3 4 5 6
Transmission frequency 1284
PIN
protection
no
Define/change PIN 0000
Proceed
OK